Irradiation Crosslinkable HFFR TPE Insulation and Sheath(125℃)
Irradiation Crosslinkable HFFR TPE Insulation and Sheath(125℃)
Description
This material is used for halogen-free flame retardant(irradiation crosslinkable) wire and cable insulation material. It is made of high- quality resin, flame retardant, antioxidant agent and cross-linking agent by mixing granulation. None-halogen property makes the materials non-toxic when burning; it has excellent flame retardancy, good physical and mechanical properties and processing performance; its heat resistance level is 125℃, can pass the VW-1 combustion test.
Standard: BS EN 50525/2014
Application: EN-SS/Flexible wire
Property
Item |
Unit |
Test method |
Before |
After |
|
Density@23℃ |
g/cm³ |
ASTM D792 |
1.05 |
1.05 |
|
Tensile strength |
MPa |
IEC 60811-1-1 |
11.5 |
14.0 |
|
Elongation at break |
% |
580 |
480 |
||
After aging @135℃, 168h |
Tensile strength variation |
% |
IEC 60811-1-2 |
— |
14 |
Breaking elongation variation |
% |
— |
-12 |
||
Hot prolongation@200℃, 0.2MPa, 15min |
Elongation under the load |
% |
IEC 60811-2-1 |
— |
25-40 |
Permanent deformation |
% |
— |
0 |
||
Low temperature bending test@-20℃ |
— |
IEC 60811-1-4 |
No crack |
No crack |
|
Combustion test |
— |
ASTM E662 |
VW-1 |
VW-1 |
|
The halogen acid gas content |
mg/g |
IEC 60754-1 |
none |
none |
|
pH |
— |
IEC 60754-2 |
5.0 |
5.0 |
|
Electrical conductivity |
µS/mm |
IEC 60754-2 |
2.5 |
2.5 |
|
Dielectric strength@20℃ |
MV/m |
IEC 60243-1 |
≥25 |
≥25 |
|
Volume resistivity@20℃ |
Ω·cm |
ASTM D257 |
1.5×1015 |
1.5×1015 |
|
Hardness |
Shore A |
ASTM D2240 |
80 |
80 |
Processing
Recommend to use conventional single screw extruder and specific low smoke halogen-free screw. Melt pressure to compounds shall be enough when extruding cables.
Zone |
1 |
2 |
3 |
4 |
5 |
6 |
Neck |
Head |
Temperature Range℃ |
160 |
165 |
170 |
175 |
180 |
185 |
190 |
190 |
- Above temperature is only for reference.
Storage
- Keep at room temperature;
- Storage environment should be clean, dry and ventilated;
- Please dry it after a long-time opening;
- Best use within six months from the date of production.
Product packing
- 25kg in moisture resistant aluminum laminated bags with composite paper bags outside;
- palletized bottom.